Using the Rotary Dry Master carpets dry in 1-4 hours
DriMaster's™ patented process
replaces the ordinary spray jet with a dynamic high-flow, high-recovery
cleaning head. Instead of a jet spraying solution several inches above the
carpet, the DriMaster™ process first injects solution into the carpet pile
through a precision slot which is angled toward a matched vacuum recovery port.
The solution is applied as a “sheet” rather than a jet spray, allowing precise
control of the penetration necessary to thoroughly clean the carpet fiber
without wetting the carpet's backing. Creating a highly effective “Cleaning
Zone”, the hot cleaning solution passes through the carpet's face fiber and is
immediately extracted.
Recent tests conducted by an
independent testing facility reveal that HydraMaster’s Rotary DriMaster™ Power
Tool leaves 85% less moisture in carpets after cleaning. The tests were
completed in laboratory controlled conditions using scientific soiling,
cleaning and measuring procedures. Completed in August 2003, the testing
revealed that a standard 2-jet Scrub Wand left 3.1 ounces of moisture after
cleaning, while the RDM left 0.46 ounces on a test area of about 3 square feet.
This indicated that the RDM left only 15% as much moisture as a wand and
confirmed the RDM’s amazing ability to recover moisture and achieve
significantly faster dry-time results. Cleaning Efficacy tests conducted
simultaneously, further revealed that the RDM cleaned better than the Standard
Scrub Wand.
|